Up to 55 mm cutting depth can be achieved
with machine height of only178 mm.
Probably the lowest machine with the largest
cutting depth on the market.
Motor Power Watts 1100
Tool holder Directly Weldon 19 mm (3/4″)
Coolant supply Manual
Stroke 63 mm/ 2.1/2″
Voltage 230 Volts
Magnetic adhesion 1200 kg/ 2645 lb
Magnetfuß 86 x 196 mm Starr
Gewicht 11,00 kg/ 24,00 lb
THE NEW MAG-TEC SENSOR:
The sensor detects how well the magnet keeps the machine on the ground.
It is directly connected to the engine.
If the sensor is illuminating “RED” , the ground is dirty (rust, varnish residues, chips), the material is thinner than 6 mm or the feed rate is to high.
The machine does not have a safe stand. The engine does not start or turns off.
If the sensor is illuminating “GREEN”, the magnetic holding force is optimal and the use of the machine is safe.