Thermic Lance Holder 16mm

SKU TLH Categories ,
KR Ladle



Thermic Lance Handle
A Thermic Lance Handle is necessary for the safe operation of a Thermic Lance. This Handle can be adapted to suit 12mm, 16mm & 19mm Thermic Lances. It has a built-in Flash/Slag Arrestor, which does not restrict the volume of Oxygen that is required to operate the Thermic Lance. The new design Handle now has a heavier Locking Nut to allow extra Hand-Tighten pressure on securing & sealing the Lance into position. Also, spanner grooves has been machined in, if the operator is fatigued and does not have to rely on Hand-Tightening alone.
•This Handle should only be used with minimum 10mm I.D. Oxygen Hose with standard 5/8″ UNF Fittings
•Recommended Operating Pressure : 420kpa (60psi) Do Not Exceed 600kpa (85psi)
•If extra Oxygen Flash-Back Arrestors are used, please ensure they are High-Volume Arrestors, as the Thermic Lance requires sufficient volume to operate efficiently.

Additional information

Weight 3.1700 kg
Dimensions 41.5 × 9.5 × 9.5 m