Unimig Razor 350amp MIG/TIG/MMA DC Multi Function SWF Inverter Package 3Ph

SKU KUMJR350SWF Categories ,
ADD TO QUOTE

The Uni-Mig 350 SWF is an inverter-based MIG welding machine with added MMA and DC TIG function. This is an industrial machine equipped with a separate 4 wheel gear driven wire feeder and 10m interconnecting cables. The MIG function allows you to weld with solid and Flux Cored Gasless wires. Adjustment of Voltage & Wire Feed at the wire feeder make for easy setting of welding parameters and give the convenience of remote adjustment from the power source. Crater Current setting delivers perfect finishing of the weld, the electronic inductance offers fine adjustment of the arc characteristic and burn back adjustment leaves the wire stick out ready for the next weld. Wire inch and Gas Check provides set up of wire feed and gas setting without any wastage of wire or gas. Added MMA welding capability delivers easy and high quality welding using electrodes, including cast Iron, stainless steel and low hydrogen. Connection of the 26V TIG torch provides quality DC TIG (Lift Arc) welding of mild steel, stainless steel and copper. Ideal for heavy and structural welding applications, general engineers, maintenance workshop and rural workshops. Certified to – AS/NZ60974.1

MACHINE PACKAGE

  • UNI-MIG 350SWF Multifunction Welding Inverter,
  • SB36 4M Sure Grip MIG torch,
  • 10M Arc lead,
  • UNI-FLAME Twin Gauge Argon Regulator,
  • 2M Gas Hose,
  • 10M Interconnecting Cables,
  • Trolley
  • Latest IGBT inverter technology
  • MIG/MAG with Gas and Gasless wire function
  • VRD (Voltage Reduction Device)
  • MMA
  • DC TIG welding with lift arc start
  • Stepless Voltage & Wire Speed controls at wire feeder
  • Variable Inductance
  • Burn Back control
  • 2T/4T trigger function
  • Adjustable Crater Current function
  • Gas Check
  • Wire Inch
  • Digital Volt / Amp meters
  • Geared 4 roll wire feeder
  • Euro style MIG torch connection
  • 10m interconnecting cables
  • Heavy duty trolley with tool draw
  • Push Pull Ready
  • PRIMARY INPUT VOLTAGE: 415V Three Phase
  • SUPPLY PLUG: No plug supplied (32 AMP Recommended)
  • RATED INPUT POWER (kVA): 12.8
  • Ieff (A): 26.0
  • RATED OUTPUT: 50A/16.5V – 350A/31.5V
  • NO LOAD VOLTAGE (V): 65
  • PROTECTION CLASS: IP21S
  • INSULATION CLASS: F
  • POWER FACTOR: 0.93
  • MINIMUM GENERATOR (kVA): 20.0
  • DINSE CONNECTOR: 35/50
  • STANDARD: AS/NZ60974-1
  • SUITABLE MATERIAL: Mild Steel, Stainless Steel, Cast Iron, Silicon Bronze, Aluminium, Copper
  • WARRANTY (Years): 3

MIG SPECIFICATIONS

  • MIG WELDING CURRENT RANGE: 50-350A
  • MIG DUTY CYCLE @ 40°C: 40% @ 350A
  • MIG WIRE SIZE RANGE: 0.6-1.2mm
  • MIG WIRE SPOOL SIZE: 5kg / 15kg
  • MIG WELDING THICKNESS RANGE: 1-16mm
  • DRIVE ROLLER SIZE: 30/22 (x2)

TIG SPECIFICATIONS

  • TIG FUNCTION TYPE: DC Lift Arc
  • TIG WELDING CURRENT RANGE: 20-350A
  • TIG DUTY CYCLE @ 40°C: 40% @ 350A
  • TIG WELDING THICKNESS RANGE: 1-10mm

STICK SPECIFICATIONS

  • STICK WELDING CURRENT RANGE: 20-350A
  • STICK DUTY CYCLE @ 40°C: 40% @ 350A
  • STICK ELECTRODE RANGE: 2.5-6.0mm
  • STICK WELDING THICKNESS RANGE: 2-16mm
  • DIMENSIONS (mm): 595x280x440mm
  • WEIGHT (kg): 41kg
  • SWF DIMENSIONS (mm): 630x235x420mm
  • SWF WEIGHT (kg): 14kg
  • SWF INTERLOCKING CABLE LENGTH (m): 10m
  • WIRE DRIVE: Seperate 4 Geared
  • VRD: Yes
  • SPOOL GUN CONNECTION: Yes
  • PUSH / PULL GUN CONNECTION: Yes
  • BURNBACK ADJUSTMENT: Yes
  • WIRE INCH: Yes
  • INDUCTANCE CONTROL: Yes
  • THERMAL OVERLOAD PROTECTION: Over Temperature Warning
Weight 90.0000 kg
Dimensions 127.5 × 47.5 × 88 m