Unimig Razor MIG/TIG/MMA Gouge 500amp DC Inverter SWF Multi Function Package 3Ph

SKU KUMJRRW500SWF Categories ,
Welding Guns

ADD TO QUOTE

The MIG500SWF is an inverter-based MIG welding machine with added MMA and TIG function. This is an industrial machine equipped with a separate 4 roll gear driven wire feeder and 10m interconnecting cables. The MIG function allows you to weld with Solid wires, Fluxcored Gas and Gasless wires. Adjustment of Voltage & Wire Feed at the feeder makes for easy setting of welding parameters and gives the convenience of remote adjustment from the power source. Crater current setting delivers perfect finishing of the weld, the electronic Inductance offers fine adjustment of the arc characteristic and burn back adjustment leaves the wire out ready for the next weld. Wire Inch and Gas Check provides set up of wire feed and gas setting without wastage of wire or gas. Added MMA welding capability delivers easy and high quality welding using electrodes, including cast Iron, stainless and low hydrogen. Connection of the 26V TIG torch provides quality lift arc DC TIG welding of steel, stainless steel and copper. Ideal for heavy and structural welding applications, general engineers, maintenance workshop, rural workshops. Designed and built to our specification. Certified to – AS/NZ60974-1

FEATURES:
• MIG / DC Lift Arc TIG / STICK
• Air Arc Gouging
• Spool Gun / Push-Pull Gun Ready
• Seperate Wire Feeder with 10m Interconnecting Cables
• 4 Geared Wire Drive
• VRD
• Burnback Adjustment / Wire Inch
• Inductance Control
• Thermal Overload Protection

MACHINE PACKAGE:
• RAZOR MTS 500 SWF Power Source
• Seperate Wire Feeder
• SB24 Sure Grip MIG Torch (including consumables)
• 10m Twist Lock Electrode Holder
• 10m 300 Amp Earth Clamp & Lead
• MIG Trolley
• UNIMIG Twin Gauge Argon Regulator
• 2m Gas Hose Complete with fittings
• Operating Manual

TECHNICAL DATA:
• PRIMARY INPUT VOLTAGE: 415V Three-Phase
• SUPPLY PLUG: No plug supplied (32 AMP Recommended)
• RATED INPUT POWER (kVA): 25.3
• Ieff (A): 24.3
• RATED OUTPUT: 50A/17V – 500A/39.0V
• NO LOAD VOLTAGE (V): 85
• PROTECTION CLASS: IP23
• INSULATION CLASS: F
• POWER FACTOR: 0.93
• MINIMUM GENERATOR (kVA): 26.0
• DINSE CONNECTOR: 35/50
• STANDARD: AS/NZ60974-1
• SUITABLE MATERIAL: Mild Steel, Stainless Steel, Cast Iron, Silicon Bronze, Aluminium, Copper
• WARRANTY (Years): 3
• MIG SPECIFICATIONS
– MIG WELDING CURRENT RANGE: 50-500A
– MIG DUTY CYCLE @ 40°C: 60% @ 500A
– MIG WIRE SIZE RANGE: 0.6-1.6mm
– MIG WIRE SPOOL SIZE: 5kg / 15kg
– MIG WELDING THICKNESS RANGE: 1-30mm
– DRIVE ROLLER SIZE: 30/10 (x2)
• TIG SPECIFICATIONS
– TIG FUNCTION TYPE: DC Lift Arc
– TIG WELDING CURRENT RANGE: 20-500A
– TIG DUTY CYCLE @ 40°C: 60% @ 500A
– TIG WELDING THICKNESS RANGE: 2-10mm
• STICK SPECIFICATIONS:
– STICK WELDING CURRENT RANGE: 20-500A
– STICK DUTY CYCLE @ 40°C: 60% @ 500A
– STICK ELECTRODE RANGE: 2.5-6.0mm
– STICK WELDING THICKNESS RANGE: 2-20mm
• DIMENSIONS (mm): 595x280x440mm
• WEIGHT (kg): 43kg
• SWF DIMENSIONS (mm): 630x235x420mm
• SWF WEIGHT (kg): 14kg
• SWF INTERLOCKING CABLE LENGTH (m): 10m
• WIRE DRIVE: Seperate 4 Geared
• VRD: Yes
• SPOOL GUN CONNECTION: Yes
• PUSH / PULL GUN CONNECTION: Yes
• BURNBACK ADJUSTMENT: Synergic
• WIRE INCH: Yes
• INDUCTANCE CONTROL: Yes
• CRATER CURRENT CONTROL: Yes
• THERMAL OVERLOAD PROTECTION: Over Temperature Warning
• AIR ARC GOUGING: Yes

Additional information

Weight 57.0000 kg
Dimensions 114 × 50 × 144 m